Power Post Driver

Registered Design No. 126405


Marchant Engineering has been manufacturing the Air Driven Power Post Driver in Australia since 1987, helping farmers and fencing contractors to build long strained fences in record time. It will drive star posts through bitumen, shale and black soil surfaces as well as ironstone and sandstone.

This air tool has proven its worth in the harsh terrain of Australia, New Zealand, South Africa, UK and now the USA; where in Texas it is the only hand held tool powerful enough to drive oil pipe into broken limestone, turning a job that took 4 hours per post into a job that takes 12 minutes per post.

It is performance like this and the Driver’s versatile size that has made it the perfect tool for a wide range of fencing projects, like temporary fencing for construction sites, putting in roadside reflector posts on highway projects and security fencing for US Air Force bases in Afghanistan.

Power Post Picket Driver
Picket Post Driver benefits

NEED TO DRIVE IN SOMETHING OTHER THAN "Y" POSTS?

With the application of additional
drive kits the Power Post Driver
can drive in:
.  Trellising Posts
.  Some plastic posts
.  Roadside guide posts
.  Timber stakes
.  Earth rods
.  1 1/2" through 6" round or square steel or timber posts
.  Angle corner strainers
        and many more . . .

Power Post Picket Drive Kit
Picket Post Driver components

This air tool has been proven on the harsh terrain of Central Australia building long strained fencing in record time. It will drive T posts through shale, black soil surfaces, rocky ground, ironstone and caliche rock. It is easily dismantled for servicing and replacing the striking dolly.

Drives T Posts and Trellising Posts with ease. Also drives trellising posts, plastic posts, timber stakes, 2", 3" and 4" round or square wood posts.

Comes with a striking dolly, allen key, quick release coupling and 12mm brass tail.

12 months warranty. Weight – 40 lbs

. Various sized striking dollys and guides (Options)
. Adaptor dolly – tool holder
. Chisel, Pick, Bead Breaker (Optional)
. Guide post drive kits (Options)
. Fittings

INFORMATION ON DRIVERS & SPARE PARTS

Driver comes with:
. Standard 54mm guide
. Striking dolly in the driver
. Quick release coupling & hose clamp to connect hose to driver
. 12mm brass tail & hose clamp to connect hose to compressor
. Spare grub screws, lock nuts & allen key

To drive 2 " to 4 " water pipe a high tensile plug must be used in the top of the pipe and then transferred to the next pipe. Also drives roadside guide posts. (Included in Drive Kits)

  1. STRIKING DOLLY - There is 1 dolly in the box with the driver. A dolly will fatigue between 5,000 to 15,000 posts depending on the type of ground and how the driver is used. Farmers will probably never need another dolly while contractors will break them after continual use. It is advisable to always have a spare dolly so you can continue to use the driver if you break a dolly.
  2. ADAPTOR DOLLY - The adaptor dolly has a 25mm hole with 6 sets of grub screws to hold any tool you want to make up yourself. This could be a ramming bar, bead breaker, rock breaker, chisel, flat faced tamper for compacting mud brick and earthen walls etc. To use the adaptor dolly firstly remove the guide then unscrew the retaining nut and replace the striking dolly with the adaptor dolly. Do not replace the guide. Anti-seize grease needs to be used on the shank of the tool.
  3. CHISELS - Chisels are 1150mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool.
  4. PICK - Picks are 1150mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool.
  5. BEAD BREAKER - 38mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool.
  6. GUIDE POST DRIVE KITS - Drive kits are available for Dura-Post, Ezy-Drive and Smart posts. Other sized drive kits can be made to your needs.
  7. GUIDES - The standard guide supplied is 54mm.Additional guides are available from 56mm to 145mm bore.
  8. PLUGS TO SUIT - 2.375", 2.875" ", 3.5 ", and 4" pipe. To be placed in the top of the pipe and then transferred to the next pipe.

Proud member of AgSearch.us  ||  Website design & hosting by Hale Multimedia

The best air driven Picket Post Driver